Ion-science Cub User Manual download pdf (Page 25)

CUB MANUAL Ion Science Ltd

Page 25 of 42

Unrivalled Detection. www.ionscience.com

CubPC software

Data log

Use this area to set the interval between readings. The minimum time permitted is one second.

Calibration

From the drop-down list, select the gas that the Cub is calibrated for.

Cub offers two-point calibration (zero to a specified concentration). To define the span that the Cub is

calibrated for, in the ‘Span’ field, enter the concentration in ppm.

The calibration procedure is detailed in the ‘Maintenance’ section of this manual.

Features

Low sensitivity Cubs can be upgraded automatically via an internet connection. The customer can purchase

an upgrade from his local distributor or supplier. Once the upgrade has been purchased the instrument must

be connected to a computer running the CubPC software. The Cub instrument will then be automatically

upgraded, via the internet connection.

TWA STEL

Select the appropriate regulatory code to which you are working using the radio buttons.

In the ‘TWA Alarm’ and ‘STEL Alarm’ fields, enter more different (i.e. more stringent) TWA and STEL alarm

levels if required.

Sound

If there is to be a sound when the button on the Cub is pressed, tick the first checkbox.

If there is to be a sound when there is an alarm on the Cub, tick the first checkbox.

Sound volume is adjusted with the slider.

Tick the ‘Alarm Latch’ checkbox if an alarm is to continue to sound after the conditions that triggered the

alarm are no longer present.

Note: Unchecking this box means the alarm can be reset by pressing the on/off button twice. The first press

silences the audio alarm, the second press stops the LED’s flashing.

Vibrate

If, when there is an alarm, the Cub is to vibrate, select the second radio button. If not, select the first.

PID

Select the PID lamp type from the two options. Ensure that the lamp selected is the same as that fitted in

your Cub.

Alarms

In this section enter the high and low alarm levels for the selected gas.

Screens

In this section tick and un-tick the checkboxes to specify which screens are displayed in the Cub. Refer to

‘Understanding the Display Screen’ for further details.

Send to Instrument

When you have entered the required configuration, send it to your Cub by pressing the ‘Send to Instrument’

button.

The USB LED on the docking station will change to yellow while the new settings are being downloaded to

the connected Cub.

If the message ‘There was a problem sending to the instrument’ appears, click OK. Repeat the procedure

under ‘Starting CubPC’ above and repeat the procedure. If your PC still fails to write to your Cub seek

advice from your distributor or from Ion Science Ltd.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Comments to this Manuals

No comments

Ion-science Cub User Manual Page 25

Comments to this Manuals

Related products and manuals for Sensors Ion-science Cub